|

Miniature Track – NSL Brite Strip

NSL Brite Strip can be used as miniature track lighting. It is available in low voltage (12 volt or 24 volt).

This smaller track may be used as

  • Accent lighting
  • Inside cabinets
  • Over countertops
  • Shelves
  • Display cases
  • Wall or ceiling cove lighting
  • Task lighting

Field cuttable strip has molded sockets that can hold two, three and four bulbs or fixtures per foot. Whether you use incandescent, xenon or LED, this system is dimmable. The directional fixtures hold MR11 bulbs.

NSL Brite Strip holds 5 or 10 watt clear or frosted festoon bulbs or fixtures that hold 20 watt MR11 bulbs. Safe remote power supply powers up to 480 watts on a 24 volt system or 240 watts on a 12 volt system.

NSL LED Brite Strip uses 0.5 watt festoon bulbs. Safe 24 volt remote power supply powers up to 180 sockets per LED Driver.

Brite Strip Reflector Extrusion Extrusion with 3M doubled-sided tape applied to back. Ready to mount & attach Brite Strip to. Does not include any Brite Strip or accessories.
Brite Strip Reflector Extrusion

NSL Brite Strip Reflector provides a custom profile and increases light output over 50%. Bright aluminum gives maximum reflected light. Polished brass adds a “golden” tone to reflected light. The anodized aluminum extrusion has a “tru-form” PVC mounting channel to easily snap in Brite Strip.

NSL Brite Strip Fascia Extrusion
NSL Brite Strip Fascia Extrusion

NSL Brite Strip Fascia Extrusion provides a custom profile to shield Rope Light or Brite Strip from view while reflecting light where it is desired. It is available in aluminum, bronze or white finish. It has a “tru-form” PVC mounting channel to easily snap in Brite Strip.

NSL Brite Strip Cove Reflector One-step solution to mounting cove molding and lighting. Ships without double-sided tape as screws or drywall anchors will work better with this reflector. Once you have mounted reflector, just attach Brite Strip, LED Brite Strip, or LED eStrip in the center of pre-engineered reflector section.
NSL Brite Strip Cove Reflector

NSL Brite Strip Cove Reflector is a one-step solution to mounting cove molding and lighting. Just mount the Cove and snap Brite Strip into the “tru-form” PVC mounting channel in the center of the pre-engineered cove reflector.


Similar Posts